You will need tech diving gear if you want to dive deeper into the seafloor. These gears offer features not found in recreational diving gear. Backplate/wing and sidemount BCDs are some examples. Advanced regulators and tanks are necessary for technical diving. This article will help you identify the best gear for your requirements.
Equipment for technical diving
Tech diving gear, for the most part is modular. This allows you to easily customize it to your requirements. A tech BCD consists of a backplate made from steel or aluminum, a harness and an air bladder. D-Rings can be added to make the harness fit your body. Another option is the wings. They are available in various sizes and configurations. You can even use one tank and make your gear fit it.
Types of gear
There are many different types of equipment for recreational and technical diving. Each type of diving requires a specific equipment. While recreational divers may use a regular BCD, tech divers often need special backplate/wings and sidemount BCDs. They also need advanced tanks, regulators, and computers. This article will explore the differences between the two types of gear and what you should look for in your technical diving equipment. The following information will help you make the right choice for your diving needs.
Configuration of gear
Tech divers are often required to use different gear. Despite these differences, all of the gear is optimized for the same purpose: keeping a diver comfortable during the dive. Below are some tips to help you choose the right tech dive gear. It is important to keep in mind that gear configurations should be simple but effective. A high-quality regulator will, for example, have a high rating. Because gas density increases when diving deep, equipment should be able to withstand these changes.
Computers
The most advanced tech dive computer features larger displays and HD screens. They can be used for all kinds diving, from technical to recreational. Some models come with hoseless air integration, digital compasses and GPS features. Safety is paramount. Divers computers that don't accurately calculate decompression factors can cause serious problems.
Thermal protection for cold water divers
Many Special Operations Forces personnel perform operations and training in neoprene wetsuits. These suits offer only a tiny amount of insulation at the top, and only 1/4 of the total insulation below 100 feet. New wetsuits have been developed with R-values in single digits to solve this problem. These suits will reduce thermal bridge by using innovative multi-layer constructions and stop-gap material.
Rebreathers
Rebreathers can be a good choice if your goal is to replace open-circuit gear with scuba gear. Rebreathers are more difficult to maintain and require more diving time than open circuit regulators. They also have more potential for harm. Before you buy a rebreather, make sure to research the benefits.
Sidemount BCDs
The STEALTH 2.0 is one of the first sidemount BCDs for technical divers, and it has proven to be a revolutionary design. This backmount harness features an integral TEC wing for added security during decompression stops and deep dives. The manufacturer also offers a new low-pressure inflator that can be mounted to the bottom. The STEALTH 2.0 is available in single tank, double-tank, or dual-tank configurations.